Mirror-like effect coatings resin BC5043
Mirror-like effect paint is a new developed paint, which is composed of special resins and precious metal pigment. The metal flashing is very similar to electroplating.
BC5043 Physical and Chemical Data:
| Test item |
Standard |
| Appearance |
Silver liquid |
| Hardness |
48h:Grade F |
| Adhesion |
48h:<1 |
| Dry time-by touch |
5mins(25℃) |
| Dry time-harden |
<6 hours (relative humidity 70%) |
| Thickness(μm) |
10 |
Characteristic＆Note:
- Mirror effect on PCPSPMMAPET. Glass etc, transparent materials. Good adhesion and solvent resistance.
- Directly spray by low-pressure gun without dilution on the PCPSPMMAPET, Glass material.
Dry time: surface dry<5 mins, thorougly dry<6 hours.
Construction Description:
- Thoroughly stir it before use.
- Before spray, make sure the surface of materials clean by dust elimination, oil disposing, water elimination.
- Spray the film evenly, pervious to light is allowed.
- In order to make better mirror effect, spraying a layer of protective paint on the mirror-effect paint is recommended to enhance theresistance to scratch and antiwear.
- Better mirror effect showed in the condition of hot spray(baking glass to the temperature around 30℃).
- Clean and cool working place recommended, high temperature and humidity or polluted circumstance not allowed.
Mirror-like effect coatings resin BC5043
Mirror-like effect paint is a new developed paint, which is composed of special resins and precious metal pigment. The metal flashing is very similar to electroplating.
BC5043 Physical and Chemical Data:
| Test item |
Standard |
| Appearance |
Silver liquid |
| Hardness |
48h:Grade F |
| Adhesion |
48h:<1 |
| Dry time-by touch |
5mins(25℃) |
| Dry time-harden |
<6 hours (relative humidity 70%) |
| Thickness(μm) |
10 |
Characteristic＆Note:
- Mirror effect on PCPSPMMAPET. Glass etc, transparent materials. Good adhesion and solvent resistance.
- Directly spray by low-pressure gun without dilution on the PCPSPMMAPET, Glass material.
Dry time: surface dry<5 mins, thorougly dry<6 hours.
Construction Description:
- Thoroughly stir it before use.
- Before spray, make sure the surface of materials clean by dust elimination, oil disposing, water elimination.
- Spray the film evenly, pervious to light is allowed.
- In order to make better mirror effect, spraying a layer of protective paint on the mirror-effect paint is recommended to enhance theresistance to scratch and antiwear.
- Better mirror effect showed in the condition of hot spray(baking glass to the temperature around 30℃).
- Clean and cool working place recommended, high temperature and humidity or polluted circumstance not allowed.
